Technical parameters:
Material thickness: 1.5 - 3 mm
Size of purlin : 80-300mm
Power:
Voltage : 380V/3PH/50HZ
Main Motor : 7.5 KW
Hydraulic Motor : 5.5 KW
Hydraulic Pressure : 10-12MPa
Main machine
Flattening rollers : 7 rollers
Main forming Station : 13 steps
Forming Shaft : diameter 85 mm, 45# steel thermal refining
Roller Material : GCR15 bearing steel quenching HRC58-60°
Main machine body : 350# H steel welded
Transmission : Chain and Sprocket, chain size 2 inch
Wall plate : 20 mm thickness
Blade material : Cr12 mould steel with quenched treatment60-62°
Punch Mould (if needed) : Cr12 quenched
Forming Speed : 7-10m/min for standard solutionHydraulic cutting system : fully automatic . Material of blades: Cr12, quenching treatment.
Forming rollers
Specification: 45# steel, CNC Lathes, heat treated 45# steel, roller surfaces polishing, hard plating. The polished surface and the heat treatment towards the molds also can keep the molding. Plate surface smooth and not easy to be marked when it is being stamped . Feature: hard chrome plating, 0.05 mm
Main frame
specification: 350 H steel. feature: More stable, no shaking
Guide device
It is used to control the width and position of the steel sheet.The sheet is guided into the machine with correct position, to make sure the panel is neat and parallel.
C Z purlin produced by the Purlin Roll Forming Machine is good in bending resistance, straightness, and it can cut, punch automatically, it is very easy and convenient to use. It can be used as bearing structure in big and medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater and so on.
Manual uncoiler
It is used to support the steel coil and realize the uncoiling by means of rotatory movement. The steel coil is uncoiled manually. The capacity of this uncoiler
is 5 ton, and it is capable for most of the coils.
Feeding
Receiving the raw material (steel sheet), it guarantees the products are neat, parallel and everything is uniformity.
Electrical control cabinet
PLC is adopted to organize all action of the machine. The length of workpiece is adjustable according to the setting of on the PLC. Two optional control modes:Automatic and manual. By automatic mode, the machine can realize fully automatic working .
Hydraulic system
Hydraulic oil:40#.Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
Client came to visit our factory for the Interchangeable C Z Purlin Roll Forming Machine , rollers shutter door roll forming machine , door frame roll forming machine and other roof and wall panel roll forming machine .
How to contact us ?
24 hours service the world ! Your kind inquiry or sample are warmly acceptable !
