Galvanized Electrical Power Transmission Tower
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,FCA,CPT,CIP|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Packaging:||usually by old old blanket other required by cliens confirm|
|Place of Origin:||china mainland|
|Certificate:||SGS BV ISO9001|
Model No.: FT
Galvanized electrical power Transmission Tower
Poles For electric description:
Galvanized electrical power transmission tower:Steel tower,steel pole,1000kv and under electric angle Steel Transmission Line Tower, electric power transmission tubular tower,electric transmisssion steel pole/monopole,lattice angular tower,substation/railway steel structure and related Steel Structure.
-Original design and manufacture in accordance with domestic or ANSI/TIA-222-G
Note:Only our company can offer this design code within China mainland ,which give us an edge over competitors.
-Our Polygonal Steel Pole and Steel Octagonal Pole Galvanization:ISO 1461/ASTM A123
- Low Voltage and HSteel Power Poles Material:ASTM A572,S355,Q345/Q235,etc
-Electric Transmission Pole Material Code:GB/T1591-2008,GB/T700-2006
-Excellent service including supervision and supplementary components
-Custom designs and operational decorative solutions
-Excellent service including supervision and supplementary components-Custom designs and operational decorative solutions
To design in accordance with PLS software ,we need following design parameters:
1. The operational wind speed of the region where the Tower will be use,
2. The Antennas loading of the Tower and at what height ?
3. The Total height of the Tower itself.
2015 best selling electric transmission line steel pole lighting
,Multi-pyramidal,Columniform,polygonal or conical
Normally Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52-
Torlance of dimenstion
10 KV ~550 KV
Safety factor for conducting wine : 8
Safety factor for grounding wine : 8
Design Load in Kg
300~ 1000 Kg appliced to 50cm from the to pole
Name palte through rivert or glue ,engrave ,emboss as per customers requirements
Hot dip galvanized Following ASTM A123, color polyester power or any other standard by clients required.
Joint of Poles
Insert mode ,inner flange mode ,face to face joint mode .
Design of pole
Against earthquake of 8 grade
160 Km/Hour . 30 m /s
Minimum yield strength
Minimum ultimate tensile strength
Max ultimate tensile strength
Length of per section
Within 14m once forming without slip joint
We has past flaw testing.Internal and external double welding makes the welding beautiful in shape
Welding Standard :AWS ( American Welding Society ) D 1.1
2 mm to 30 mm
material checking→Cutting→Molding or bending→Welidng (longitudinal )→Dimension verify→Flange welding→Hole drilling→Calibration→Deburr→Galvanization or powder coating ,painting→Recalibration→Thread→Packages
Our poles as usual are covered by Mat or straw bale at the top and bottom ,anyway we can also follow clients required , each 40HC or OT can load pieces according to calculation which bases on the clients` actual specification and data.
Yixing Futao Metal Structural Unit Co. Ltd is located in No.8 Nanxin East Road, Heqiao Town, Yixing City, Jiangsu Province.Equipped with a series of numerical control conveyor systems of flattening, cutting, folding and auto-welding, we could manufacture high & medium mast lighting, road lighting power poles, sight lamps, courtyard lamps, lawn lamps, traffic signal poles, monitor poles, microwave communication poles etc.Moreover,Our manufacturing process has been ISO9001 certified.Therefore,we own a large-sized numerical control hydraulic pressure folding machine with once folding length 13,000mm and the thickness 2-20mm.
we have been honored with the title of the AAA grade certificate of goodwill".In 2015 we have owned 27 Transactions for more than US $1,300,000 in the latest 12 months.
Transmission Pole Production Process
As a BV ,ISO ,SGS supplier in China ,we have more than 10years produce and export steel-
- A factory certificate issued by the factory with stamp and signature must be provided before unloading the material in our factory , otherwise we have rights to refuse.
- Before put into production , all the material must be passed the chemical and physical analysis to make sure that they have met the requested strength and component.
To assure our products qualified , we take steps as follows :
1. Management team : We have employed the experienced senior experts to take charge of the whole management ,especially the technical management and quality management .
2.Introducing ISO management :We are aware of ISO 9001:2008 certificate .
3.QC Inspection :It is our company policy that all the finished products should be inspected by our specialized QC in every manufacture step and before each shipment
We have completed many big and important projects all over the world and win the trust from our clients.
1. Price Term: FOB, CFR or CIF.
The price includes pole shaft, based plate, cross arm and anchor part.
Shipping seaport: Shanghai Seaport. For FOB, CFR or CIF price, please specify which exact model you need, then tell us quantity of your order so that we can calculate the local transport charge and sea freight.
2. MOQ: 1 set for Customized
3. Payment: Typically 30% by T/T as a deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
4. Delivery time : goods can be ready for shipment within 10 workdays after receiving deposit.
5 Warranty : 30 years
6.Surface treatment :hot dip galvanization
Steel Electric Pole and Galvanized Steel Pole Application: Electric Transmission
YIXING FUTAO METAL COMPONENT UNIT CO.,LTD
Yixing Futao Metal Structural Unit Co. Ltd. is com manded of Jiangsu Futao Group. It is located in the beach of scenic and rich Taihu Yixing with good transport service. The company is well equipped with advanced manufacturing facilities. We own a large-sized numerical control hydraulic pressure folding machine with once folding length 16,000mm and the thickness 2-25mm. We also equipped with a series of numerical control conveyor systems of flattening, cutting, folding and auto-welding, we could manufacture all kinds of steel poles and steel towers. Our main products: high & medium mast lighting, road lighting, power poles, sight lamps, courtyard lamps, lawn lamps, traffic signal poles, monitor poles, microwave communication poles, etc. Our manufacturing process has been ISO9001 certified and we were honored with the title of the AAA grade certificate of goodwill" Presently 95% of our products are far exported to Europe, America, Middle East, and Southeast Asia, and have enjoyed great reputation from our customers, So we know the demand of different countries and different customers. We are greatly honored to invite you to visit our factory and cheerfully look forward to cooperating with you.
- Company Name: YIXING FUTAO METAL COMPONENT UNIT CO.,LTD
- Representative: Limin Shen
- Product/Service: Steel Poles , Light Poles , Electric Poles , High Mast Lighting , Traffic Light Poles , Monopole Towers
- Capital (Million US $): 50000000RMB
- Year Established: 2002
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: 20
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: 8#, Nanxin East Road, Heqiao Town
- Contact Person: Ms. amily li
- Tel: 86-0510-87871161
Premium Related Products